PZ3X Spa Ozonator



A complete ozone generator cartridge for portable spas or custom applications, the PZ3-X Ozonator has set the reliability standard for the industry. The system is engineered for ozone-ready spas and can stand alone to replace any existing spa ozonator. For maximum ozone/water mixing, the PZ3-X can be used with our patented bypass Dynamic venturi injector kit. All PZ3-X models have a full two-year warranty. With a return rate less than .1% its statistical dependability has been proven over significant volumes. The PZ3-X is Underwriters Laboratory (UR) Recognized and Classified and may be UL listed for spas.
It has been tested to NSF Standard 50 for life expectancy and ozone output.

Standard System

  • PZ3-X13 120 VAC, 60 hz, .35 amps
  • PZ3-X24 240 VAC, 60 hz, .42 amps
  • Electrical: Solid State Ballast: 120 VAC or 240 VAC 50/60 hz
  • Construction: Engineered Thermoplastics
  • Stand alone to replace any existing spa ozonator
  • Amp Plug
  • Full installation kit with check valve


  • EMI Suppressed and Transient Protected: Up To 2,000 VAC
  • Ballast: UL Listed File # 474D Type 1
  • Arc Tube: designed for long life and consistent ozone output

Maximum Ozone Output: (grams per day)

  • PZ3-X13 - 6 gr.
  • Generation Tested: 100% Burn in, Hypot and O3 Output
  • Arc Life (Nominal): 20,000 Hours
  • Operating Temperature: +25�F. to +120�F.
  • Storage Temperature: -30�F. to +160�F.
  • Size: 14� x 3� Diam.
  • Patents #5,075,016; #6,192,911; #6,426,053; #6,342,154 and patents pending.

Warranty Information

All warranties are provided by the manufacturer, Prozone Water Products, Spa and Pool ozonators is for a period of 24 months from date of purchase, Air Purifiers are 12 Months, and extends only to the original purchaser. If this unit becomes unserviceable due to defects in materials or workmanship within 12 or 24 months from date of purchase, it will be repaired or replaced without charge. Warranty does not apply to breakage due to obvious misuse. Warranty period for a repaired or replaced unit applies to the original date of purchase of the unit.

A Returned Goods Authorization (RGA) number must be obtained from Prozone before returning the product. Product must be returned within 30 days of issuance of the RGA number. If the product is not received by Prozone within 30 days of RGA number issuance, another RGA number must be obtained. An RGA number must be obtained before warranty period expires.

This warranty along with the sales receipt must accompany the unit when it is returned. The RGA number must be printed prominently on the bottom left corner of the address side of the return packaging. To obtain an RGA number, or for any questions regarding warranty service, please contact:

Tel: (256) 539-4570
Fax:(256) 539-4225

This warranty is void if the unit has been opened, or if the product identification label has been removed or altered. This warranty does not cover damage resulting from misuse, abuse, accident, fire, flood, lightning or other acts of nature, lack of reasonable care, or connecting the product to any but the specified voltage.

Under the terms of the warranty, manufacturer assumes no responsibility for any injury, loss or damage (direct, indirect, or consequential) arising out of the use of or inability to use the product. Manufacturer assumes no responsibility for labor involved in removal of defective part, shipping or installation of new part. This warranty gives you specific legal rights; other rights may vary from state to state. This warranty is in lieu of all other warranties, express or implied.


Related Products

Customers Also Viewed